Sunday, January 25, 2015

Checking left wing structure and skin fit

Had a good week attaching the left wing spar to the jigs and checking out the fit of the left wing sub-structure and skins.  Everything fit together quite well and putting it all together helped me think through a logical riveting sequence once all the components are primed.
Riveting the wing jigs together
Wing ribs clecoed onto spars.  Wing root looking outward.  Fuel cell will eventually go in front
of the spar to line up with the leading edge ribs in the background
Bottom skins on - wing tip looking inward.
Left wing top skins - wing root looking outward.
Left wing top skins - wing tip looking inward.

No comments: